Springfield Spring

Established in 1942, Springfield Spring Corporation is ISO 13485 and 9001 registered. We are a diversified manufacturer of precision engineered mechanical spring components, with over 75 years of experience. Some of these industries served include firearms, military hardware, medical devices, surgical instruments, elevators, timing devices, lighting, windows, screen and more. The firearms and medical industry both have a "Zero Tolerance" policy for component failure which is why "Quality" is one of the most important attributes we offer to all industries we serve. We have three plant locations: East Longmeadow, MA, and Bristol, CT.


We offer turn-key assembly to help our customers reduce cost and optimize "value-stream" supply-chains. This value-added service helps our customers reduce internal assembly resources and the need to coordinate multiple supply-chain vendors.


We are passionately committed to listening to our customer needs and easing their pain. This is achieved by "THE SPRINGFIELD More... SPRING EXPERIENCE"


 A commitment to the creation of a strategic and long-term relationship with our customers.


 - We will..... consistently deliver high-quality components.


 - We will..... deliver "solutions" - not ideas.


 - We will..... be adaptive (fast and flexible).


 - We will..... meet or exceed the expectations of our customers.


 - We will..... earn our customers' trust.... every day.


 - We will..... listen to our customers.


 - We will..... deliver exceptional customer service - unlike anything they've ever experienced.


 - We will..... help our customers bring their products to the global market place, improve their bottom lines, reduce their inventories, minimize mistakes, expedite the flow of information and create efficient systems to support these objectives.

S & J Precision

In October of 1990, S & J Precision was formed by Steve and Sheila Wallace in a two car garage, with a very cramped beginning.


After just one year, the company had outgrown its modest quarters and had to make the move to a bigger facility. Although it was only 2,000 square feet, it was a big improvement.


Between May of 1992 and January 1995, Steve and Sheila were involved in the acquisition of another machine shop in partnership with a third party. On January 1, 1995, the decision was made to sell their stock in the second machine shop so that they could focus all of their energies on S & J Precision.


During that next year, S & J grew dramatically from five to fifteen employees and in May of 1996, the company moved into an expansive new 16,000 sq. ft. facility.


In 2004 we added additional 9,000 square feet to our facility, followed by addition building purchase in 2006 of 9,000 square feet.


In 2015, with S & J Precision continual growth we expanded our operations into a newly designed 50,000 More... square foot facility that allows us to offer our clients even wider range of services including, full-scale machining, complete automation, light and heavy welding services, metal fabrication, laser cutting, injection molding, engineering services and much more.Thanks to a dedicated team of knowledgeable professionals, the latest technology to meet the needs of the future and a consistent focus on quality and service, we anticipate continued growth for years to come. We pride ourselves on always delivering outstanding customers service, rapid response time, flexible scheduling and unbeatable production cost saving all with experienced, knowledgeable and dedicated engineering staff.

H.D.H. Instruments

H.D.H. Instruments Offers Precision Honing, Machining & Deephole Drilling.


H.D.H. Instruments is an industry leader in deep hole drilling, honing and precision machining of tubes.


We specialize in all types of material including:


Alloys, Aluminum, Berrillium, Carbon, Duplex, Hastelloy, Incoloy, Inconels, Monels, Nitronic, Nonmag, Stainless, Titanium, Tool Steel & more_x0085_


*Gundrilling


.078_x0094_ to 1.500_x0094_ On-Center Only


Up to 120_x0094_ long


*Ejector/Solid Drilling


.950_x0094_ to 7.250_x0094_ On-Center & Off-Center


Up to 360_x0094_ long


*Trepanning


5.000_x0094_ to 9.500_x0094_ On-Center & Off-Center


Up to 200_x0094_ long


*Honing


.0625_x0094_ to .484_x0094_ up to 14_x0094_ long


.484_x0094_ to 1.750_x0094_ up to 360_x0094_ long


1.750_x0094_ to 16.000_x0094_ up to 600_x0094_ long


*Specializing in Honing of Finished Machined Parts, Fine Finishes, 


Blind End Bores & Double Blind End Bores


*Turning


*General Machine Shop with 


Turning up to 20_x0094_ OD


Up to 396_x0094_ long


*Specializing in Precision Tubes requiring tight Concentricity & Straightness


*Sawing


All materials up to 12_x0094_ diameter More...

Broadwind Towers and Heavy Industries, a division 

Faro Industries Inc.

K & S Welding Fab

We are a CNC job shop that provides machined parts and CERTIFIED d17.1 welding. 


K&S Welding Fab is a Father and Son CNC Machining/Welding shop, located in Santa Ana, CA. We have been in business since 2008, serving local and out-of-state businesses with all different types of welding and machining projects. We are AWS certified in TIG Welding (D17.1 Class A, D1.1 Class A and D1.2). We specialize in doing small/large production runs parts, that require CNC machining and certified assembly welding. We have experience on all types of metals (Aluminum, Stainless Steels, Steel Inconel, Titanium and Exotic Metals). 


WHY PARTNER WITH US?


Here at K&S, we not only focus on giving you top quality fabricated products, but we focus on building relationships with our business partners. This allows us to become extremely reliable, trust-worthy and communicative with your entire team, giving you worry-free time regarding any jobs left with K&S Welding. Through this approach, we have built decades long More... partnerships that has allowed us to work on lucrative contracts; including those from: Boeing, Northrop Grumman, NASA/JPL and various US Defense branches.


 We provide high quality CNC machined parts with 3-Axis Mills. To accompany our CNC machines, we provide certified D17.1 TIG welding. We are extremely communicative with all projects and will report any errors, whether it be the part is slightly out of tolerance or a weld seems to be cracking. All parts will come deburred unless otherwise noted. We are also capable of doing very complex assembly welding in house as well as regular assembled parts.


 Contact us today and let us build a relationship with your company, so that we may provide the best timely-finished products as possible, for your end consumer.

N-Forcer Div. Of Die, Mold & Automation Components

Persal Manufacturing Solutions

_x0093_Provide the best solution for the implementation and management of Manufacturing and Logistics Solutions by means of our world class organization_x0094_.


_x0095_ Experienced Senior Management Team


_x0095_ Skilled and Qualified Labor Force 


_x0095_ Bilingual staff (English & Spanish) 


_x0095_ ISO-9001:2008 Certified 


_x0095_ ASME Codes 


_x0095_ Welders Certified Under AWS-D1.1 


_x0095_ Navy Specifications 


_x0095_ Certified Materials 


_x0095_ Proximity to the Major Markets of the Western U.S.

Capacités de fabrication

Pays

Services spécialisés

Certifications

Solutions spécialisées et distribution

Expertise industrielle

Fournisseurs d'Usinage CNC: Fraisage de très grande dimension, Tournage de très grande dimension, Usinage à haute cadence, et Usinage à bas volume au (United States)

Capacités de fabrication:

Emplacement: